Call us : +91 8080890022

Products Details

Tesnit®

Tesnit® BAM

 Tesnit BAM
Material BAM
Composition Aramid and engineered mineral fibers bonded with NBR.On request is available with wire reinforcement or expanded stainless steel.
Colour Grey / Green
Properties Excellent resistance to steam, oils, fuels, gases, freons,solvents, non-aggressive chemicals, hot water and othersubstances.
Industries Heat exchangers, boilers, radiators, steam supply,power plants.
Certificates BAM (Oxygen), DIN-DVGW DIN 3535-6, DVGW VP 401,DVGW KTW, TA-Luft (VDI 2440), WRAS, EC 1935/2004, 100% AsbestosFREE Certified Manufacturing Plant (to avoid contamination) and Product (certified 100%)
Equivalent NonAsbestos can only be Manufactured in an AsbestosFREE Certified Manufacturing Plant. Insist on all the above listed certificates and approvals to assess Equivalence.
Density DIN 28090-2 g/cm3 1.7
Compressibility ASTM F36J % 10
Recovery ASTM F36J % 60
Tensile Strength ASTM F152 Mpa 13
Stress Resistance
16 h, 50 MPa, 175 °C DIN 52913 MPa 35
16 h, 50 MPa, 300 °C DIN 52913 MPa 27
Specific Leak Rate DIN 3535-6 mg/(s.m) 0.05
Thickness Increase ASTM F146
Oil ASTM F146 % 5
Fuel ASTM F146 % 6
Percentage Creep
Room Temp DIN 28090-2 % 4.1
Elevated temp DIN 28090-2 % 0.8
Compression Modulus
Room Temp DIN 28090-2 % 10.8
Elevated Temp DIN 28090-2 % 11.0
Max OperatinG
Peak Temp °C 440
Continuous Temp °C 350
Steam °C 300
Pressure Bar 120
Download Pdf or YouTube